Test & Measurement EQUIPMENT RENTAL Solutions

Somerset T&M Solutions provides a wide array of portable PIM testers and analyzers with frequencies ranging from 700MHz to 1.9GHz. We offer models from leading manufacturers such as Kaelus’ iPA-707A and Anritsu’s PIM Master MW82119B.

PIM Analyzers are used to detect and locate sources of passive intermodulation or PIM. PIM is a growing issue for cellular networks, and PIM analysis is a requirement among the major carriers operating in the FDD 4G frequency bands.

Anritsu 

PIM Master

MW82119B-0700: LTE 700 MHz
MW82119B-0850: Cellular 850 MHz
MW82119B-0194: PCS/AWS 1900/2100 MHz

PIM Master MW82119B Battery-operated, High Power Portable, Passive Intermodulation Analyzer with optional Cable and Antenna Analyzer. PIM Master B-series is a 40 Watt, battery-operated PIM analyzer featuring Site Master line sweep capability.

PIM Master Accessory Kit

2000-1746-R

The 2000-1746-R accessory kit includes the RF components, tools, and cleaning supplies needed to support Passive Intermodulation (PIM) testing at a typical cellular installation. The low PIM termination and RF adapters included in this kit support PIM testing of one- or two-port devices with any combination of Type N(m), Type N(f), 7/16 DIN(m), or 7/16 DIN(f) RF connectors.

PIM Master Hunter Probe

2000-1884-R

PIM Hunter is a specialized antenna to identify IM products from 600 to 2700 MHz. Operates with Spectrum Master and BTS Master series, and with Site Master series (with bandpass filter). PIM Master™ MW82119B is required to generate the primary test tones to create IM products for the PIM Hunter to locate.

ConcealFab

Filter Kit

Two-Port PIM Testing
700 MHz

ConcealFab’s patent pending 900633-01 filter kit enables 700 MHz two-port testing using portable PIM test equipment from Kaelus or Anritsu. The kit includes the low PIM filter required to split the F1 and F2 test tones. 

PIM Shield Tape

PIM Shield™ tape is a rapidly deployable RF barrier able to bond to a wide variety of surfaces including metals, single-ply roofing, multi-ply roofing, concrete, brick and wood. The tape’s highly compliant synthetic resin adhesive enables strong bonds to irregular surfaces. 

Kaelus IPA Series

iPA-707A: 700MHz LOW/HIGH
iPA-850A: 850MHz
iPA-1921A: Dual Band PCS/AWS (1930 – 1950 MHz)

The iPA Series Passive Intermodulation (PIM) analyzer is the first battery powered PIM Test Analyzer versatile enough to support multiple test scenarios such as testing at the top of the tower, base of tower, roof top and in-building for DAS systems. 

Kaelus IPA Series Accessory Kit

IAK-0060A

The iAK is a Passive Intermodulation (PIM) premium test accessory kit that includes all of the necessary components required to validate test equipment operation and perform PIM testing on systems with 7-16 DIN and Type-N connectors. 

Rosenburger

PIM Site Analyzer Alpha

Interchangeable to frequency band(s):
700, 800, 900, 1800, 1900, 2100, 2600 MHz

The PIM Site Analyzer consists of a single Master Unit with band-specific, interchangeable filter units, since the form factor of the filter units is the same. Take out one filter unit, e.g., 900 MHz, and replace with another filter unit, e.g., 1800 MHz, without any calibration of the filter unit, potential adaptors, test cable, or operational mode(s). Future-proof Plug and Play concept covering 700 to 2700 MHz. 

DO NOT FORGET YOUR ACCESSORIES!

In addition to the core products that we carry, we can also offer accessories such as phase-matched cables, adapters, calibration kits, antennas and more with your rentals!